unisonic technologies co., ltd gs1010fl preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd ver.a surface mount general rectifier ? description the utc gs1010fl is a surface mount general rectifier, it uses utc?s advanced technology to provi de the customers with low profile package and low leakage current, etc. the utc gs1010fl is suitable for esd protection and surface mounted applications, etc. ? features * low profile package * esd protection * low leakage current ? symbol sod-123f ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 gs1010flk-ca2f-r GS1010FLG-CA2F-R sod-123f k a tape reel note: pin assignment: a: anode, k: cathode ? marking information package marking sod-123f
gs1010fl preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw ver.a ? absolute maximum ratings (t a =25c, unless otherwise specified) parameter symbol ratings unit repetitive peak reverse voltage v rrm 1000 v maximum rms voltage v rms 700 v maximum dc blocking voltage v dc 1000 v rectified current (average) ha lf wave rectification with resist. load at t a =25c (note 1) i o 1.0 a surge forward current at t<1s, t j =25c i fsm 30 a junction temperature t j -55~+150 c storage temperature t stg -55~+150 c notes: 1. absolute maximum ratings are those values bey ond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. measured at 1mhz and appli ed reverse voltage of 0v d.c. ? thermal data parameter symbol ratings unit junction to ambient ja 200 c/w ? electrical characteristics (t a =25c, unless otherwise specified) parameter symbol test conditions min typ max unit forward voltage v f i f =1.0a 1.1 v leakage current i r v r =1000v, t j =25c 10 a v r =1000v, t j =100c 50 a junction capacitance (note) c j 4.0 pf note: measured at 1mhz and applied reverse voltage of 4.0v d.c.
gs1010fl preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw ver.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
